SPECIFICATION COMPLIANCE:

Complies to the standard IS/ IEC 60529:2001 (RA2019)(Empty enclosure, Control Instrument)IP protection from IP 42 to IP 65.

DESIGN SPECIFICATION AND CONSTRUCTION:

• Fully welded body, Removable door with earthing stud.
• Internal bush for mounting Plate.
• Mounting bracket standard, removable or welded.
• Main body in 1.5/2 mm thick, Doors in 1.5/2 mm thick.
• Mounting bracket 3.00 mm thick,135° door opening with SS 304 Hinge

FEATURES:

Enclosure fitted as a standard with 304, 306L lock, hinges, bolted Cover, Finish Matt N 4, Internal 2 B Finish. Finish for CRCA, Powder coated 60-70 microns thick, textured or smooth finish, RAL standard 7035 shed.

MATERIAL:

MOC MS/CRCA, SS 304L /SS 316L

GASKET:

Gasket for door sealing formed – in – place foam gasket (FIPFG) / Neoprene. operating temperature of -40 to +60 degrees C

CABLE ENTRY:

Gland holes are provided at the Bottom/ Gland plate as requested by the customer

PACKING:

Packing with Bubble wrap, and Plastic wrap, corrugated/wooden packing provided on customer demand.

LOCK:

Single point, Quarter-turn Compression locks.

GLAND PLATES:

Removal from inside / outside, available in 2mm,3mm thick. steel material.

MOUNTING PLATES:

Standard 2 mm galvanised sheet, mounted on bush. Side mounting plate on customer demand.

EARTHING:

M6 / M8 earthing stud on body and door provided with washer and nut as standard.